About materials, produced by ALTAIR LLC
Polycarbonate
| ПК-ЭТ-7-УФ |
Transparent, UV stabilized, 88-92 % light transmittance, extrusion-type.
Intended use: production of monolithic and cellular sheets and other moldings such as lighting diffusers, profiles, tubes. |
| ПК-ЛТ-20-УФ | Transparent, UV stabilized, 88-92 % light transmission, molding.
Intended use: transparent products injection molding, enhancement with UV stabilization available. Products: light diffusers, protective globes of measurement units, and other products requiring high strength and transparency. |
| ПК-ЛТ-20-ОМ | Spin-dyed under RAL, Panton or sample.
Intended use: a variety of frame parts requiring high strength, heat resistance (145 °C), surface gloss.
Self-extinguishing ПВ-2*, 650 °C glow-wire fire test. |
| ПК-ТС-16-ОД | With fire retardant. For products with an increased requirement for flammability: ПВ-1*, ПВ-0*. In undyed form the light transmittance is more than 85%.
Intended use: in lighting products, electrical products, used in buildings, structures and transport. |
| ПК-Л-СВ30 | Glass-filled, flammability ПВ-1*, ПВ-0*, 960 °C glow-wire fire test. It can not be transparent. It has high stiffness and high insulating properties. Shrinkage is equal to 0.2-0.3 %.
Intended use: in detachable joint of micro- and macrosize, insulating and high-voltage connections, elements of contact pairs in the electrical wiring. |
| ПК-М-2 | Modified, with high stress cracking resistance. ПВ-0* flammability and 960 °C glow-wire fire test. |
| Tegnolight | Light-diffusing material for LED lamps. High effect and uniformity of diffusion of point light-emitting diode glow through flat surface. Light transmittance is up to 80%. |
| ПК-ЛУВ-10(30) | Carbon-filled, 960 °C glow-wire fire test, high modulus of elongation, 10% antistatic 109 Оhm х m, 30 % - electrically conductive 103 Оhm х m. Shrinkage is up to 0.2 % .
Intended use: in frame works, instruments in aviation, shipbuilding and other modes of transport, requiring screening for high noise immunity of hardware components. Allows to make the product without additional machining of conjugated articles. It can replace metal in many cases. |
Besides, the development of composites based on polycarbonate under the customer's specifications is possible.
Tegnoral Colored ABS Plastic
| Tegnoral-7-УФ | Extrusion-type, available in any colors under RAL, Panton or sample, UV stabilized (provides outdoor application of polymer).
Intended use: in auto industry for the manufacture of internal and outdoor elements, vehicle finishing, as well as large overall frame elements of medical and other products by the vacuum molding. Cold-resistance as low as -25 °C. |
| Tegnoral-10-УФ | Molding, high shock-resistant, available in any colors under RAL, Panton or sample, UV stabilized.
Intended use: in auto industry for the manufacture of internal and outdoor elements, vehicle finishing, as well as large overall frame elements of medical and other products by injection. Cold-resistance as low as -25 °C. |
| Tegnoral-20-УФ | Molding, middle fast flowable, available in any colors under RAL, Panton or sample, UV stabilized.
Intended use: for decorative fittings that do not require high strength characteristics. It is used in consumer electronics and other products for general use. |
| Tegnoral-30-УФ | Molding, easily flowable, available in any colors under RAL, Panton or sample, UV stabilized.
Intended use: for decorative fittings that do not require high strength characteristics. It is used in consumer electronics and other products for general use. |
| Tegnoral-TC | Molding, heat resistant. Vicat softening temperature of 105 °C. Available in any colors under RAL, Panton or sample.
Indended use: electrical products that do not have raise requirements for immunity to fire. |
ABS can be manufactured as per the customer's specifications.
Tegnofor Composite
| Tegnofor FR-1 |
The composite is in compliance with fire-resistant ABS in processing quality and is superior in physical and mechanical performance (as it does not contain any halogen mineral components) as well as in thermal performance. Vicat softening point is equal to 140-145 °C, ПВ-1*, 750°C glow-wire fire test.
Intended use: frame works with the requirements to which it complies. |
| Tegnofor FR-2 |
The composite is in compliance with fire-resistant PC+ABS in processing quality and is superior in physical and mechanical performance as well as in thermal performance. ПВ-1*, ПВ-0*, 750°C glow-wire fire test.
Intended use: frame works with the requirements to which it complies. |
| Tegnofor FR- MS | Fire-resistant composite (ПВ-0*, 850°C glow-wire fire test) with high physical and mechanical properties at ambient temperature as low as -60 ° C. It is intended for any products that are used under low temperature conditions. |
| Tegnofor FR-MS-AS | Antistatic (3·108 Ohm), fire-resistant (ПВ-0*) with high physical and mechanical properties at low temperatures as low as -60 °C.
It is intended for the manufacture of products requiring antistatic and
screening. It can be used for a variety of products used in low-temperature conditions, in products that require ПВ-0* flammability at low temperatures, high vibratory loads. |
Tegnol Composite
| PC+ABS |
| Tegnol 0840 |
Extrusion-type, stable extrusion properties, high physical and mechanical characteristics, including at -30 ° C. |
| Tegnol 1640 | Molding, with high physical and mechanical properties, including at -30 ° C. |
| Tegnol 2430 | With increased melt fluidity, improved molding properties. |
ABS+PC |
| Tegnol 0830 |
Extrusion-type, high-technology material in the extrusion and vacuum molding. |
| Tegnol 2525 | Molding, high-technology material. |
| Tegnol 1824 | Analogue of heat resistant ABS. Vicat softening point of 110 ° C. |
Polyamide-based composite
| ПА-6-210КС |
Glass-filled up to 30%.
|
| ПА-66 | Molding, available in any colors under RAL. With high heat resistance to 175 °C.
Intended use: for electrical items with such requirements. |
| ПА-610Л | Molding, available in any colors under RAL.
Intended use: in aviation and rocket production and in other topics with high demands on the stability of the physico- mechanical and insulating properties at low moisture absorption. |
| ПА-610КС | Glass-filled, with a low moisture absorption. |
| ПА-6Л-УВ-10 (15) | Antistatic, high modulus of elasticity from 8000 to 9000 mPa. Used for load-bearing elements of sealing rings (glands), power cylinders, spherical liners in ball bearings and tie rods, high laden supporting bearers. |
| ПА-6Л-УВ-20 (30) | Electrically conductive, with high modulus of 10000 to 12000 mPa.
Intended use: for load-bearing elements of sealing rings (oil seals), power cylinders, spherical liners in ball bearings and tie rods, high laden supporting bearers. |
| Polyimide | High-temperature (up to 360 °C) , extrusion-type, highly adhesive. |
Masterbatches of various colors for polycarbonate.
The masterbatches are designed in the way that they do not affect the physical and mechanical properties of polycarbonate, as they were designed exclusively for polycarbonate.
Stable product quality.
Introduction of 0.5-1.2% (depending on the thickness of the PC sheet as well as on your preference for color value).
Number of colors used for coloring polycarbonate is limited only by your imagination.
* - under GOST 28157-89 which is in harmony with International Electrotechnical Commission in a part of burner flame effect.
